MEREMERE MEDIA

July 24, 2012

Sunday was without a doubt the happiest I’ve been since I left Australia in March. This Datsun of mine has been off the road for an eternity due to a number of distractions and money guzling activities so to have it driving and to drift with my friends again after so long, made me grin from ear to ear. Note to self: don’t start projects that are outside your current financial and time means. I only entered for a half day as I was yet to give it a real beating and didn’t know how it would handle it all. It worked out for the best however as on my last run before lunch I did a particularly heavy footed run and put a hole in the radiator! It looks like the factory plastic fan flexed enough to catch the bottom tank which is placed (foolishly) close to the fan. The blade slid off and put a hole in one of the core lines. I haven’t had it out yet but it should be fixable. The biggest entry contest that went down in the afternoon was what I was really looking forward too and I’m super gutted I didn’t get to compete… next time.

Massive thanks to my homies Joel and Mike for organizing a killer day and to the photographers who where out in the rain (I know how it feels haha) Mr. Roo Wills shot these photos and there are more on his blog stay classy that you should go look at, thanks Roo!

READY

July 21, 2012


I’m all loaded up and ready for the first drift day with the SR20 tomorrow. Here’s hoping nothing big goes wrong! Between driving I’ll definitely be shooting so I’ll post some photos up next week.

IT HOWLS

July 8, 2012

I’ve become lazy at updating beeoneoneoh because after following a few incredibly well documented and fast moving builds, I hardly feel motivated to do so. Well I have some news at the least so here’s where I am:

The last post I did on the 120 I was driving it up and down the driveway but it was lacking a few crucial things which I’ve now resolved.
– Alternator now charges the battery
– Swaybar is now installed with new bolts/nuts and I’ve cleaned up the links. I took out the thicker 120Y bar because I thought it wasn’t helping with understeer with the A15 in there. I may put it back but the factory one is fine for now. Note, when you properly lower a B110/B120 the swaybar rotates and touches the front of the sump. I made shortened linkages to fix this but with the SR sitting nicely into the firewall, I no longer need them. Factory items work perfect.
– I went around the engine bay and tightened a bunch of things which I had left finger tight as it was all being taken off so frequently. This definitely fixed a few issues.
– I went through the wiring with a diagram and deleted some unnecessary items and connected everything properly. I still need to figure out a few things but I did get the use of many items back which helps when you’re trying to test drive around the hood at night.

This week I drove it around the block with unsatisfactory results but it drove non the less. I figured that having fuel in the tank (that wasn’t stale) was a good place to start. I drove it again tonight after doing the above with very good results. Clean power delivery, and a smooth induction howl through the valley. I’m stoked, over the moon in fact. Time to get serious about knocking this bastard out so I can drive it without the fear of loosing my license.

Here’s an old photo for nostalgia’s sake:

Before you get too excited, let me just say there’s still a long list of small bullshit things to do on this thing before I can properly drive it. It does however have suspension with heavier springs up front, functioning brakes and a handbrake, radiator mounts (it has cardboard protecting the fins so I don’t leave it on the car outside), a clutch, POR15’d crossmember, new ball joints and suspension bolts, rust and a dented body haha. After fitting the suspension, bleeding the brakes and riveting on the radiator support panel I thought what the hell, time to put it on the ground for some inspiration. My wallet is cowering at the thought of cutting rust, paint and certification so I can drive it on the road. Time to start saving!

CANDY RIVER

May 14, 2012


TWO OF THE BEST. VIA: sayohonda

CLASSIC CAR NAGOYA

March 31, 2012


Prince Skyline at Classic Car Nagoya / November 2010

#1 B210

February 27, 2012

Still king of B210. I want this but a coupe

Silly 1000

February 21, 2012

510 Coupe

February 20, 2012

510 Via ZEPPANN

November 27, 2011

Via: ZEPPANN

Yes, this ZEPPANN. Youtube channel here

%d bloggers like this: